Elastomer Rubber Bearing Supplier
SIGTECH is widely known as a fabrication and sales center for quality rubber bridge bearings in Indonesia. There are various models and sizes, one of which is as follows:
- Length: 400 mm
- Width: 350 mm
- Height: 50 mm
- Maximum load: 105 tons
- Rubber Material: Natural Rubber (NR), or Chloroprene (CR)
- Standardized SNI of ASTM-251-74, SNI 3967 in 2008
- AASTHO
Rubber bridge bearings play an important role as a component that stabilizes bridge construction from various movements that may occur. Movement in bridge construction is generally caused by shear deformation and also rotational deformation on the bridge structure.
These rubber pads are mounted on the bottom of the girders as a pedestal, so that it dampens vibrations that occur due to vehicle loads that pass through it.
SIGTECH products offer various advantages, including:
- 3 year guarantee
- Standardized AASHTO (American Association of State Highway and Transportation Officials)
- SNI 3967-2008
- Basic natural rubber (NR), or Chloroprene (CR)
- Size and spec can be custom as needed
- Can be applied in buildings and bridges
- Passed the test at the Rubber Research Center (Indonesia Rubber Research Institute)