Specification of Rubber Elastomer Bearing Pad SIGTECH 400*300*46 mm
Sell Rubber Elastomer Bearing Pad
We sell and provide various sizes and specifications of elastomeric bearing pads, one of which is the following:
- Length: 400 mm
- Width: 300 mm
- Height: 46 mm
- Warranty: 3 years
- Max Load: 89 tons
- Base material: natural rubber (NR), Chloroprene (CR)
- Standardization: SNI and AASHTO
The use of elastomeric rubber is mandatory as a support for a bridge girder that will stabilize the bridge structure from various movements and shifts that may occur. Widely known as bridge bearing rubber, this product is able to transfer the load from the top of the bridge that is being crossed by the load to the bridge piers so that there is no direct friction or collision between the super bridge structure and the bridge sub structure. This Rubber Bearing as a bridge support, between the girder and the abutment reduces friction and vibration caused by bridge loads and other movements.
Our products offer advantages, including:
1. 3 years warranty
2.AASHTO (American Association of State Highway and Transportation Officials) standardized
3. SNI 1967-2008
4. Natural rubber (NR), Chloroprene (CR)
5. Size and spec can be custom as needed
6. Can be applied in buildings and bridges
7. Pass the test at the Rubber Research Center (Indonesia Rubber Research Institute)
