Specification of Rubber Support Girder SIGTECH 220*170*41 mm
Selling Girder Support Rubber
PT. Selaras Inti Gemilang sells and provides various types and specifications of quality mgirder rubber pads at affordable prices, one of which is the following:
- Length: 220 mm
- Width: 170 mm
- Height: 41 mm
- Warranty: 3 years
- Max Load: 25 tons
- Base material: natural rubber (NR), Chloroprene (CR)
- Standardization: SNI and AASHTO
We are widely known as the most comprehensive and cheapest rubber girder bearing manufacturer and sales center in Indonesia. We rely on quality and best-in-class elastomeric materials so that they can withstand loads of up to hundreds of tons. This bridge bearing rubber has a variety of sizes, ranging from small to large. Block-shaped so that it is easy to install.
In general, the bridge bearing rubber will accommodate a wide range of motion and rotation as well as support the weight of the structure and to transmit the load from the top span to the lower support concrete. Rotation occurs due to the deck passing the load to the bottom of the bridge. And some relative rotations occur in the composite section due to the different properties of concrete and steel.
Bearing Pad Types:
1. Laminated Elastomeric Bridge Bearings
2. Laminated Bearings
3. Lead Rubber Bearings
4. Pot Bearings
5. Base Isolation Bearings
Advantages:
1. 3 years warranty
2.AASHTO (American Association of State Highway and Transportation Officials) standardized
3. SNI 1967-2008
4. Natural rubber (NR) base material, Chloroprene (CR)
5. Size and spec can be custom as needed
6. Can be applied in buildings and bridges
7. Pass the test at the Rubber Research Center (Indonesia Rubber Research Institute)
