Rubber Sheet SIGTECH 1200020010 mm

Last Updated

08 Mar 2021

Minimum Order

1 Pieces

Specification of Rubber Sheet SIGTECH 1200020010 mm

This rubber sheet is a slab on pile bearing structure which is generally used for the construction of bridges and overpasses, both toll and non-toll roads. There are various sizes available, one of which is as follows:

• Length: 12000 mm

• Width: 200 mm

• 10 mm high

• Standardization of SNI

• The SIGTECH brand

This rubber sheet is a type of natural rubber that has been vulcanized with a special formula to support the superstructure of the bridge. Placed lengthwise under the girder and above the pier head or bridge abutments. This product has the following functions:

- For the base of the tread plate on the abudment.

- For corrective use of concrete surfaces on slab on pile structures.

- To distribute loads and movement from the floor to the slab on pile structure.

- As a barrier material between the cast concrete floors.

DRAWING

No	Description	Test Method	Natural Rubber	Neoprene
1	Hardness, Shore A	D.2240	55 (+-) 5	55 (+-) 5
2	Tensile Strength, Mpa	D.412	Min 15	MIn 15
3	Elongation at break, %	D.412	Min 300	Min 300
4	Change in Hardness, point	D.2240	Max +10	Max + 15
5	Change in Tensile Strenght	D.412	Max -25	Max -15
6	Change in Elongation at break	D.412	Max -25	Max -40
7	Tear strenght	D.624	Min 31.18	Min 31.18
8	Compression Set 25%, 100°C, 22 hrs	D.395	Max 25	Max 25
9	Ozone resistance 100 pphm, 20% strain, 37.7°C, 100 hrs	D.1149		No crack
10	Ozone resistance 25 pphm, 20% strain, 37.7°C, 48 hrs	D.1149	No crack
11	Adhesion test, lbs/inch	D.429	Min 40	Min 40