Specification of Elastomeric Bridge Rubber SIGTECH 650*300*33 mm
PT. Selaras Inti Gemilang sells and provides various types, sizes and specifications of elastomeric bridge bearing rubber, one of which is the following:
- Length: 650 mm
- Width: 300 mm
- Height: 33 mm
- Warranty: 3 years
- Max Load: 148 tons
- Base material: natural rubber (NR), Chloroprene (CR)
- Standardization: SNI and AASHTO
This bridge bearing rubber is made from best-in-class natural rubber and elastomeric materials, so it can withstand loads of up to hundreds of tons. The raw materials used have certainly passed the material feasibility test so they are fit for use. This product is able to protect structures and infrastructure in bridge construction and also serves to provide security that accommodates various movements and rotations as well as support the weight of the structure and to transmit loads from the top span to the lower supporting concrete. Rotation occurs due to the deck passing the load to the bottom of the bridge. And some relative rotations occur in the composite section due to the different properties of concrete and steel.
Advantages:
1. 3 years warranty
2.AASHTO (American Association of State Highway and Transportation Officials) standardized
3. SNI 1967-2008
4. Natural rubber (NR), Chloroprene (CR)
5. Size and spec can be custom as needed
6. Can be applied in buildings and bridges
7. Pass the test at the Rubber Research Center (Indonesia Rubber Research Institute)
