Specification of Elastomeric Bridge Rubber SIGTECH 250*250*20 mm
We sell quality elastomeric bridge bearings at affordable prices. There are various sizes and specifications, one of which is as follows:
- Length: 250 mm
- Width: 250 mm
- Height: 20 mm
- Warranty: 3 years
- Max Load: 44 tons
- Base material: natural rubber (NR), Chloroprene (CR)
- Standardization: SNI and AASHTO
In general, this rubber bearing is designed as the main support for the girder with the lower supporting concrete in the construction of a bridge construction which functions to withstand pressure or loads on the bridge. Also known as the elastomeric bearing pad, this product is installed to transmit the load from the top of the bridge that is being crossed by the load to the piers of the bridge so that there is no direct friction or collision between the bridge super structure and the bridge sub structure.
This rubber bearing as a bridge support, between the girders and the abutments reduces friction and vibration caused by bridge loads and other movements.
Various advantages are offered from this SIGTECH bridge bearing rubber, including:
1. 3 years warranty
2.AASHTO (American Association of State Highway and Transportation Officials) standardized
3. SNI 1967-2008
4. Natural rubber (NR), Chloroprene (CR)
5. Size and spec can be custom as needed
6. Can be applied in buildings and bridges
7. Pass the test at the Rubber Research Center (Indonesia Rubber Research Institute)
We accept orders for various sizes and types of bridge bearing rubber / elastomeric bearing pads in large quantities.
Please contact us and get attractive prices.
Greetings, Construction Friends!
SIGTECH
