Specification of Elastomeric Rubber SIGTECH 600*300*55 mm
We sell quality elastomeric rubber at affordable prices. This product is a very important component in stabilizing the bridge structure from various movements and shifts that may occur. There are various sizes and specifications, one of which is as follows:
- Length: 600 mm
- Width: 300 mm
- Height: 55 mm
- Warranty: 3 years
- Max Load: 136 tons
- Base material: natural rubber (NR), Chloroprene (CR)
- Standardization: SNI and AASHTO
Made from selected and best-in-class elastomeric materials, so they can withstand loads of up to hundreds of tons. In general, this bridge bearing rubber is installed as a load channel from the top of the bridge that is being crossed by the load to the bridge piers so that there is no direct friction or collision between the super bridge structure and the bridge sub structure. This rubber bearing as a bridge support, between the girders and the abutments reduces friction and vibration caused by bridge loads and other movements.
Bearing Pad Types:
1. Laminated Elastomeric Bridge Bearing
2. Laminated Bearings
3. Lead Rubber Bearings
4. Pot Bearings
5. Base Isolation Bearings
Advantages:
1. 3 years warranty
2.AASHTO (American Association of State Highway and Transportation Officials) standardized
3. SNI 1967-2008
4. Natural rubber (NR), Chloroprene (CR)
5. Size and spec can be custom as needed
6. Can be applied in buildings and bridges
7. Pass the test at the Rubber Research Center (Indonesia Rubber Research Institute)
