Specification of Rubber Elastomer SIGTECH 360*360*86 mm
Elastomeric rubber is designed as a bearing material for bridge girders, thereby reducing all vibrations and movements that may damage the construction. We provide various sizes of bridge elastomeric bearing rubber, one of which is as follows:
- Length: 360 mm
- Width: 360 mm
- Height: 86 mm
- Warranty: 3 years
- Max Load: 97 tons
- Base material: natural rubber (NR), Chloroprene (CR)
- Standardization: SNI and AASHTO
The use of elastomeric rubber is common in Indonesia. Play an important role in stabilizing the bridge structure. This component is installed at the bottom of the concrete girder, that is, between the girder and the abutment reducing friction and vibration caused by bridge loads and other movements. The bridge bearing rubber is able to minimize damage to the bridge structure caused by a shift in one of the invisible and rotational bridge structures that must be accommodated to protect the structure and infrastructure in bridge construction and also functions to provide security that accommodates various movements and rotations and supports the weight of the bridge. the structure and to transmit the load from the top span to the lower support concrete. Rotation occurs due to the deck passing the load to the bottom of the bridge.
Advantages:
1. 3 years warranty
2.AASHTO (American Association of State Highway and Transportation Officials) standardized
3. SNI 1967-2008
4. Natural rubber (NR), Chloroprene (CR)
5. Size and spec can be custom as needed
6. Can be applied in buildings and bridges
7. Pass the test at the Rubber Research Center (Indonesia Rubber Research Institute)
