Specification of Bridge Bearing Rubber SIGTECH 500*300*40 mm
The construction of the bridge construction generally relies on the bridge bearing rubber material as the support for the girder. We provide various sizes and specifications of bridge rubber, one of which is as follows:
- Length: 500 mm
- Width: 300 mm
- Height: 40 mm
- Warranty: 3 years
- Max Load: 113 tons
- Base material: natural rubber (NR), Chloroprene (CR)
- Standardization: SNI and AASHTO
Manufactured from selected quality elastomeric materials and the best in its class, so they can withstand loads of up to hundreds of tons. This rubber bearing is used to minimize damage to the bridge structure caused by a shift in one of the invisible and rotational bridge structures that must be accommodated to protect the structure and infrastructure in bridge construction and also serves to provide security that accommodates various movements and rotations and supports weight. of the structure and to transmit the load from the top span to the lower support concrete.
Bearing Pad Types:
1. Laminated Elastomeric Bridge Bearing
2. Laminated Bearings
3. Lead Rubber Bearings
4. Pot Bearings
5. Base Isolation Bearings
Advantages:
1. 3 years warranty
2.AASHTO (American Association of State Highway and Transportation Officials) standardized
3. SNI 1967-2008
4. Natural rubber (NR), Chloroprene (CR)
5. Size and spec can be custom as needed
6. Can be applied in buildings and bridges
7. Pass the test at the Rubber Research Center (Indonesia Rubber Research Institute)
