Specification of Elastomer Bridge Bearing SIGTECH 500*500*50 mm
Elastomeric bridge bearings or known as bridge bearing rubber are components that have an important role. We provide various types and sizes, one of which is as follows:
- Length: 500 mm
- Width: 500 mm
- Height: 50 mm
- Warranty: 3 years
- Max Load: 194 tons
- Base material: natural rubber (NR), Chloroprene (CR)
- Standardization: SNI and AASHTO
Designed as a bridge girder bearing that is able to withstand and accept loads from the movement caused by shear deformation and also rotational deformation in the bridge structure. This rubber bearing as a bridge support, between the girders and the abutment reduces friction and vibration caused by bridge loads and other movements.
Bearing Pad Types:
1. Laminated Elastomeric Bridge Bearing
2. Laminated Bearings
3. Lead Rubber Bearings
4. Pot Bearings
5. Base Isolation Bearings
Advantages:
1. 3 years warranty
2.AASHTO (American Association of State Highway and Transportation Officials) standardized
3. SNI 1967-2008
4. Natural rubber (NR), Chloroprene (CR)
5. Size and spec can be custom as needed
6. Can be applied in buildings and bridges
7. Pass the test at the Rubber Research Center (Indonesia Rubber Research Institute)
