Specification of Elastomer Bearing Pad SIGTECH 500*350*40 mm
Sell Elastomer Bearing Pad
This elastomeric bearing pad rubber component is a very important product in the construction of bridge construction. We provide various types and sizes, one of which is as follows:
- Length: 500 mm
- Width: 350 mm
- Height: 40 mm
- Warranty: 3 years
- Max Load: 133 tons
- Base material: natural rubber (NR), Chloroprene (CR)
- Standardization: SNI and AASHTO
Widely known as the elastomeric bearing pad. This product is designed to transfer the load from the top of the bridge that is being crossed by the load to the piers of the bridge so that there is no direct friction or collision between the super bridge structure and the bridge sub structure. This Rubber Bearing as a bridge support, between the girder and the abutment reduces friction and vibration caused by bridge loads and other movements.
Bearing Pad Types:
1. Laminated Elastomeric Bridge Bearing
2. Laminated Bearings
3. Lead Rubber Bearings
4. Pot Bearings
5. Base Isolation Bearings
Advantages:
1. 3 years warranty
2.AASHTO (American Association of State Highway and Transportation Officials) standardized
3. SNI 1967-2008
4. Natural rubber (NR), Chloroprene (CR)
5. Size and specs can be custom as needed
6. Can be applied in buildings and bridges
7. Pass the test at the Rubber Research Center (Indonesia Rubber Research Institute)
