Specification of Elastomer Bearing Pad SIGTECH 500*300*40 mm
Elastomeric Bearing Pad Fabrication
PT. Selaras Inti Gemilang is widely known as an affordable fabrication of quality elastomeric bearing pads. Various specifications are available, one of which is as follows:
- Length: 500 mm
- Width: 300 mm
- Height: 40 mm
- Warranty: 3 years
- Max Load: 63 tons
- Base material: natural rubber (NR), Chloroprene (CR)
- Standardization: SNI and AASHTO
The use of rubber pads in bridge construction is mandatory and must be fulfilled to stabilize the bridge structure from various risks of damage caused by movement and vibration that may occur. This component functions as the main supporting component of the girder with the lower supporting concrete in the construction of a bridge which functions to withstand pressure or loads on the bridge.
Our products have advantages, including:
1. 3 years warranty
2.AASHTO (American Association of State Highway and Transportation Officials) standardized
3. SNI 1967-2008
4. Natural rubber (NR) base material, Chloroprene (CR)
5. Size and spec can be custom as needed
6. Can be applied in buildings and bridges
7. Pass the test at the Rubber Research Center (Indonesia Rubber Research Institute)
Bearing Pad Types:
1. Laminated Elastomeric Bridge Bearings
2. Laminated Bearings
3. Lead Rubber Bearings
4. Pot Bearings
5. Base Isolation Bearings
