Specification of Elastomer Bearing Pad SIGTECH 250*250*20 mm
The use of elastomeric bearing pads for girder concrete bearings is of course common in Indonesia. Is a very important component in stabilizing the structure and construction of a bridge from various movements that may occur. We provide various sizes, one of which is as follows:
- Length: 250 mm
- Width: 250 mm
- Height: 20 mm
- Warranty: 3 years
- Max Load: 44 tons
- Base material: natural rubber (NR), Chloroprene (CR)
- Standardization: SNI and AASHTO
Widely known as bridge bearing rubber, this elastomer bearing pad is designed as the main support for the girder with the lower supporting concrete in the construction of a bridge that functions to withstand pressure or loads on the bridge.
PT. Selaras Inti Gemilang has experience in designing and developing quality elastomeric bridge rubber with various advantages, including:
1. 3 years warranty
2.AASHTO (American Association of State Highway and Transportation Officials) standardized
3. SNI 1967-2008
4. Natural rubber (NR), Chloroprene (CR)
5. Size and spec can be custom as needed
6. Can be applied in buildings and bridges
7. Pass the test at the Rubber Research Center (Indonesia Rubber Research Institute)
