Specification of Bridge Rubber Bearings SIGTECH 500*400*50 mm
The use of bridge rubber bearings is common in Indonesia. This component certainly plays a very important role in stabilizing the bridge structure from various movements and vibrations that may occur. We sell various size specifications, one of which is as follows:
- Length: 500 mm
- Width: 400 mm
- Height: 50 mm
- Warranty: 3 years
- Max Load: 153 tons
- Base material: natural rubber (NR), Chloroprene (CR)
- Standardization: SNI and AASHTO
This bridge bearing rubber is produced from selected and best-in-class elastomeric materials so that it can withstand loads of up to hundreds of tons. The elastomeric bridge rubber is also able to protect structures and infrastructure in bridge construction and also serves to provide security that accommodates various movements and rotations and supports the weight of the structure and to transmit loads from the top span to the lower supporting concrete. Rotation occurs due to the deck passing the load to the bottom of the bridge.
Following are the advantages of SIGTECH bridge bearing rubber:
1. 3 years warranty
2.AASHTO (American Association of State Highway and Transportation Officials) standardized
3. SNI 1967-2008
4. Natural rubber (NR), Chloroprene (CR)
5. Size and spec can be custom as needed
6. Can be applied in buildings and bridges
7. Pass the test at the Rubber Research Center (Indonesia Rubber Research Institute)
